Planning in ReluxCAD

Step 1: Setting the project defaults
When you have successfully completed the installation and then open AutoCAD, the two new ReluxCAD and Relux Interface toolbars will appear on the screen. ...
Tue, 17 Jan, 2017 at 7:48 PM
Step 2: Luminaire selection in ReluxCAD
ReluxCAD 2017 includes facilities for selecting and positioning luminaires directly in AutoCAD.  If you prefer, however, you can also select the luminaires...
Tue, 17 Jan, 2017 at 7:48 PM
Step 3: Placing luminaires in ReluxCAD
Once you have marked a luminaire, you can position it by clicking on the Select Point command button in the Luminaire selection / Symbols dialog window.  ...
Tue, 17 Jan, 2017 at 7:49 PM
Step 4: Draw a scene in ReluxCAD
Use the Draw room command to define a closed polyline corresponding to the Relux room that is to be calculated. You can select the corner points in an A...
Tue, 17 Jan, 2017 at 7:49 PM
Step 5: Draw scene objects in ReluxCAD
The Draw Objects command prompts you to select the scene. This can still be modified in the dialog if necessary. If required, you can enter an approp...
Tue, 17 Jan, 2017 at 7:54 PM
Step 6: Calculate scene (select scene)
After you have successfully defined the scene, you can call up the Relux Interface by pressing Select room. Select a room open menu Click on Start ...
Thu, 16 Nov, 2017 at 9:56 AM
Step 7: Configuring the results view
To return to AutoCAD, please select the AutoCAD Icon in the Relux menu bar, or close Relux. This will return you to the dialog window shown below again:...
Tue, 17 Jan, 2017 at 8:13 PM
Step 8: Insert parts list
When you have planned all the rooms that are required, you can compile a table of all the luminaires installed in the CAD plan with the Parts list command. ...
Tue, 17 Jan, 2017 at 8:20 PM
Luminaire symbols
Aligning symbols To align luminaire symbols to your individual requirements, click on internal symbol in the Luminaire selection / Symbols dialog window. ...
Tue, 17 Jan, 2017 at 7:04 PM
Configuring the luminaire information
In the Luminaire selection / Symbols dialog window, you can import additional information on the luminaire, providing this is available in the Relux library...
Tue, 17 Jan, 2017 at 7:03 PM